AR1

Please search and download "Soteria AI" APP to get started.

★ Make sure your smart phone is connected to the same Wi-Fi network.

Connect the Micro USB end into the camera, the plug the power adapter into the power outlet. The camera is ready for APP setup when the blue power LED indicator begins to flash.

Select AR1 in the APP then follow the instructions shown.

★ Please refer to the FAQ page for more info on how to share the viewer or administrator rights to other smart phone devices.

1. Please make sure that your smart phone is connected to the same
   Wi-Fi SSID network.
2. After selecting AR1, you will be given Internet setup options.
3. Select Auto-Detection (Recommended)

Tap on the AMID to complete

auto setup.

Note: AMID can be found on the bottom of the device. Make sure the AMID is the same as one which appears in APP setup.

Congratulations! Your AR1 is set up and ready to go

Wi-Fi indicator (Green LED) will remain solid color when Internet connection is successful.

★ Please e sure your device is running on the latest firmware.

1. Please use the provided bracket for wall or ceiling camera installation. 
2. There are 4 snap lock located on the bottom of the device. Once locked in place, please secure with the screw. 
3. Loosen the screw to adjust the angle. Be sure to tighten the screw
   to secure the camera position.

• Make sure your camera and smart phone are parallel to each other.
• Make sure your phone is connected to the same Wi-Fi router as
  your camera.
• A QR code will be generated when you enter in the Wi-Fi password.
• Show the QR code to the camera. You will hear a beep sound when setup is successful.

Power indicator (Blue LED)
Solid Blue LED : Device is powered on
Flashing Blue LED : Camera is being accessed remotely

Wi-Fi indicator (Green LED)

Solid Green LED : The device is connected to the Wi-Fi
Flashing Green LED : Camera is attempting to connect to a Wi-Fi AP router.

1. Make sure your camera is powered on.
2. Initial power on camera rotation is complete. 
3. Poke the factory reset hole with a pin and gently press down on the button (3-5 seconds) until you hear a beep.
4. Reset will take up to 25 seconds. The Blue LED indicator begins to flash when reset is complete.  

1. Please ensure your mobile device is connected tot he same Wi-Fi network.
2. Poke the WPS button with a pin and gently press down on the button (3-5 seconds) until you hear a beep.
3. Tap "Add WiFi" in the app and enter the password. 
4. Position the QR code that's generated in the APP in front of the camera lens. (The suggested distance is 15-30 cm)

We designed AR1 to be durable and easy to use. Here are some safety
guidelines that you should follow when using Amaryllo cameras.

1. Avoid placing the camera under direct sunlight
2. Use only the provided power adapter and cable for your camera. 
3. Use AR1 within its operating temperature 32° to 95°F (0° to 35°C)

Please scan the QR code to obtain more info on our Terms of Use.

★ Need help? Visit http://www.amaryllo.eu/support or drop us an email with photo or video and description of the problem to support.ai@amaryllo.eu

★ Warranty is voided if camera is dissembled.